Temperature Control Lab (TCL)

The temperature control lab is an application of feedback control with an Arduino, an LED, two heaters, and two temperature sensors. The heater power output is adjusted to maintain a desired...

Kalman Filter Virtual Lab

The Kalman Filter virtual laboratory contains interactive exercises that let you study linear and extended Kalman filter design for state estimation of a simple pendulum system. The virtual...

Virtual Labs for control education

This resource provides different links to virtual and remote labs that can be used for control education. Virtual and remote labs are very powerful tools for learning and teaching, that...

Advances in Feedforward Control for Measurable Disturbances (slides)

These slides present several contributions to improve the feedforward control approaches when inversion problem arise:  the ideal compensator may not be realizable due to negative delay...

Kalman Filter Simulink 2022A example

This model is intended to help illustrate how a Kalman filter can estimate the state of a system. The "real system" is a nonlinear model of the Temperature Control Lab by Prof. John...

Introduction to Radar Systems: Target Radar Cross Section

This course is presented by Robert M. O'Donnell, a former researcher at MIT Lincoln Laboratory, and is designed to instill a basic working knowledge of radar systems.

The set of 10 lectures...

Radar Systems Engineering Lecture 4: The Radar Equation

This Free Radar Systems Engineering Course (video, audio and screen captured ppt slides) and separate pdf slides) has been developed as a first course in Radar Systems for first year...

Control Loop Foundation Batch and Continuous Processes - Interactive Source ...

Control Loop Foundation contains workshops that allow the reader to get hands on experience through this web interface. Once a lab is selected, then you may access workshop directions and...

Quanser QUBE-Servo 2: Low-cost Teaching Platform for Controls

The Quanser QUBE-Servo 2 is a fully integrated, modular servomotor lab experiment designed for teaching mechatronics and control concepts at the undergraduate level. Ideal for teaching speed...

Virtual Lab for a Two-tanks system

This is a virtual lab for a two-tank system that can be used for modelling and control learing/teaching purposes. Open-loop tests and closed-loop simulatons based on PI control or PI plus...

T-RECS System

The Transportable Rotorcraft Electronic Control System (T-RECS) is a collection of components that can be built into a rotorcraft demonstrator.  This hardware can be used as a test bed to...

Virtual Laboratory for Vibrations and Control Theory

This virtual lab developed in Matlab Simscape provides an innovative tool for learning and teaching fundamentals of mechanical vibrations including mass-spring-damper systems. 

Instrument Kit for ME 316

This hardware kit accompanies the textbook "Project Based Engineering Instrumentation with CircultPython" by Dr. Carlos Montalvo. Using this hardware and the textbook you’ll build some...

Basic Control Lectures

Systems approach, understanding and describing the operation of systems and methods of controlling them are among the basic knowledge of engineering education. But understanding the main...