Quanser QUBE-Servo 2: Low-cost Teaching Platform for Controls

The Quanser QUBE-Servo 2 is a fully integrated, modular servomotor lab experiment designed for teaching mechatronics and control concepts at the undergraduate level. Ideal for teaching speed...

Feedforward tuning rules for measurable disturbances with PID control: a tut...

Feedforward control can be considered as the most well-known control approach to deal with measurable disturbances. It started to be used almost 100 years ago, and since then it is being...

Peter Ponders PID - Closed Loop Zeros

This video covers closed loop zeros, what causes zeros and the benefits and drawbacks of closed loop zeros.

Understanding PID Control, Part 3: Expanding Beyond a Simple Derivative

This video describes how to make an ideal PID controller more robust when controlling real systems that don’t behave like ideal linear models. Noise is generated by sensors and is present in...

Understanding PID Controller

This blog post begins by walking through the basics and the theoretical part of the PID controllers.  The controller is then tested, verified, and analyzed using MATLAB.

Peter Ponders PID - Cascade Control Part2

The inner loop pole locations and gains are calculated first so the inner loop pole locations are determined by the user. The outer loop poles are still pla...

Peter Ponders PID - Controlling a non-integrating single pole system. Part 3...

Part 3 uses PI control which is the only practical means of control a non-integrating single pole system.http://deltamotion.comhttp://forum.deltamotion.com

Control Bootcamp: Cruise Control Example with Proportional-Integral (PI) co...

In this video, we show that introducing integral control reduces the steady-state tracking error to zero in the cruise control example. We also use a more sophisticated model for the...

Direct Synthesis Method Numerator Dynamics Problem

I walk through how to design a PID feedback controller when given a second order process with numerator dynamics, using the Direct Synthesis Method.

Understanding PID Control, Part 2: Expanding Beyond a Simple Integral

The first video in this series described a PID controller, and it showed how each of the three branches help control your system.That seemed simple enough and appeared to work. However, in...

Peter Ponders PID - IAE,ITAE,ISE Performance indicators

Performance indicators can be used to compute closed loop pole locations. Only one gain parameter is required to move the pole locations closer to the origi...

Peter Ponders PID - Controlling non-integrating single pole system. Part 1 ...

Part 1 shows why P only control shouldn't be used because the set point or target is never reached.Part 2 shows why I only control shouldn't be used because ...

Cascade Control Intro

How can we improve the disturbance rejection of our controllers using additional, relevant measurements? Tune in to find out!

Peter Ponders PID. Second Order Plus Dead Time , SOPDT, Temperature Control,...

In this video I derive the equations for the controller gains and a low pass filter for a SOPDT system with a very long dead time To make the simulation mo...

Designing a PID Controller Using the Ziegler-Nichols Method

In this video we discuss how to use the Ziegler-Nichols method to choose PID controller gains. In addition to discussing the method and providing a Matlab i...

Peter Ponders PID - Controlling an Under Damp Mass and Spring System

Demonstrates:How to calculate the PID gains. The importance of the derivative gain. How to simulate the mass and spring systemControl limitations based on s...

An interactive feedforward tool for FeedForward Control

This interactive software tool is focused on basic and advanced concepts of feedforward control.

Peter Ponders PID - Why PID with 2nd Derivative Gain?

If you have ever tuned a hydraulic system and wondered why PID control didn't work better than PI control the answer is here. Since the 1980s people have kn...

PID Tuner

Tuning a PID controller can be easily done using a systematic procedure. PID Tuner just put it in a web application. No more trial and error. 

Use the step response data from your system...

Peter Ponders PID - Integrated Time Absolute Error - 4 Pole example

This video shows how to calculate the coefficients for a 4 pole ITAE and how to use the 4 pole ITAE to calculate closed loop controller gains.

Standard HW Problem #1: PID and Root Locus

A walk through of a typical homework problem using the root locus method to tune a PID controller. This is the first in what may be a series of homework style problems I'll cover. This is...

Direct Synthesis for PID Design Intro

Direct Synthesis for PID Design Intro

Peter Ponders PID-Fuzzy Logic vs PID

There are many academic and engineering papers showing how good fuzzy logic control is relative to PID control. Every FL vs PID paper I have seen compares...

Peter Ponders PID - T0P1 Part 4, Misc Topics

This video covers another way to compute symbolic gains, the difference between having the P gain act on the error or just the feedback, extending bandwidt...

Simple Examples of PID Control

In this video I continue the topic of PID control. We walk through a simple control system and visualize how each of the three paths, P, I, and D, all address specific problems that arise...