resourcium_beta
Select any filter and click on Apply to see results

Discrete Fourier Transform

MathWorks
Intermediate
Article / Blog
Theory

The discrete Fourier transform, or DFT, is the primary tool of digital signal processing. The foundation of the product is the fast Fourier transform (FFT), a method for computing the DFT...

See More

Kalman Filter Design

Mathworks
30 min
Intermediate
Article / Blog
Application

This example shows how to perform Kalman filtering. Both a steady state filter and a time varying filter are designed and simulated.

See More

MATLAB Function: phased.MVDRBeamformer

Mathworks
Intermediate
Article / Blog
Application

The phased.MVDRBeamformer System object™ implements a narrowband minimum-variance distortionless-response (MVDR) beamformer. The MVDR beamformer is also called the Capon beamformer. An MVDR...

See More

MIMO Radar: TI Application Report

Sandeep Rao - Texas Instruments
Intermediate
Article / Blog
Theory

MIMO radar is a key technology in improving the angle resolution (spatial resolution) of mmwave-radars. This article introduces the basic principles of the MIMO-radar and the different...

See More

TCLab PID Control

John Hedengren
60 min
Intermediate
Article / Blog
Application

Implement a PID controller on the Temperature Control Lab hardware to drive the temperature from room temperature to 60 degrees C. This resource lets you attempt the design yourself first...

See More

Thoughts on Furthering the Control Education of Practicing Engineers

Dr. Daniel Y. Abramovitch, Agilent Technologies, American Automatic Control Council Education Committe Chair
60 min
Intermediate
Article / Blog
Demonstration

This paper was presented at the 2019 IFAC Advances on Control Education Conference (IFAC-ACE), Philadelphia, PA, USA, July 7-9, 2019, and is in the conference proceedings. This paper aims to...

See More

Nonlinear Model Identification

Mathworks
Intermediate
Article / Blog
Application

Mathwork overview page describing nonlinear model identification. Use nonlinear model identification when a linear model does not completely capture your system dynamics. You can identify...

See More

MATLAB function: phased.LCMVBeamformer

Mathworks - Brian Douglas
Intermediate
Article / Blog
Application

The phased.LCMVBeamformer object implements a narrowband linear-constraint minimum-variance (LCMV) beamformer for a sensor array. The LCMV beamformer belongs to the family of constrained...

See More

Control Valve Problems

Jacques Smuts
20 min
Intermediate
Article / Blog
Application

Control valve problems can severely affect control loop performance and, unless eliminated, they can make controller tuning a challenging (sometimes impossible) task. Some problems are quite...

See More

The Linear Quadratic Regulator (LQR)

Laurent Lessard
Intermediate
Article / Blog
Theory

Lecture notes for ECE717 on LQR control by Laurent Lessard. There is a section that shows how the Algebraic Riccati Equation is part of the LQR solution by "completing the square".

See More

Nonlinear Control Output Signal Characterization

R. Russell Rhinehart
15 min
Intermediate
Article / Blog
Application

If the process gain makes large changes over the operating range, then tuning PID (or other linear) controllers is difficult.  If tuned for one region, the controller is undesirably sluggish...

See More

Measurements, Transmission Signals, and Issues

R. Russell Rhinehart
45 min
Intermediate
Article / Blog
Application

This is an introduction to scaled information transmission signals (for example 4-20 mA, 3-15 psig, etc.), the actual sensed signals (like using orifice dP to infer flow rate, or temperature...

See More

MATLAB Command: resid

Mathworks
Intermediate
Article / Blog
Application

This MATLAB command is part of the system identification toolbox and provides a way to compute and test residuals.

See More