Advances in Feedforward Control for Measurable Disturbances (slides)

These slides present several contributions to improve the feedforward control approaches when inversion problem arise:  the ideal compensator may not be realizable due to negative delay...

Simulating Test Signals for a Radar Receiver

This example shows how to simulate received signal of a monostatic pulse radar to estimate the target range. A monostatic radar has the transmitter collocated with the receiver. The...

MATLAB Example: Solve Constrained Nonlinear Optimization, Problem-Based

This example shows how to find the minimum of a nonlinear objective function with a nonlinear constraint by using the problem-based approach. 

Radar Systems Engineering MATLAB Documentation and Examples

The functions in this section give you the MATLAB tools needed to evaluate the performance of a radar system. You can use the radar equation to evaluate the radar received signal-to-noise...

Increasing Angular Resolution with Virtual Arrays

This MATLAB example introduces how forming a virtual array in MIMO radars can help increase angular resolution. It shows how to simulate a coherent MIMO radar signal processing chain using...

Creating Discrete-Time Models

This MATLAB example shows how to create discrete-time linear models using the tf, zpk, ss, and frd commands.

MATLAB Example: Train MBPO Agent to Balance Cart-Pole System

This example shows how to train a model-based policy optimization (MBPO) agent to balance a cart-pole system modeled in MATLAB. For more information on MBPO agents, see Model-Based Policy...

Fixed-Point HDL-Optimized Minimum-Variance Distortionless-Response (MVDR) Be...

This example shows how to implement a fixed-point HDL-optimized minimum-variance distortionless-response (MVDR) beamformer in MATLAB.

Conventional and Adaptive Beamformers

This example illustrates how to apply digital beamforming to a narrowband signal received by an antenna array. Three beamforming algorithms are illustrated: the phase shift beamformer...

Modeling Perturbations and Element Failures in a Sensor Array

This MATLAB example shows how to model amplitude, phase, position and pattern perturbations as well as element failures in a sensor array.

Automotive Adaptive Cruise Control Using FMCW Technology

This MATLAB example shows how to model an automotive adaptive cruise control system using the frequency modulated continuous wave (FMCW) technique. This example performs range and Doppler...

Improve SNR and Capacity of Wireless Communication Using Antenna Arrays

The goal of a wireless communication system is to serve as many users with the highest possible data rate given constraints such as radiation power limit and operating budget. To improve the...

Simultaneous Range and Speed Estimation Using MFSK Waveform

This MATLAB example compares triangle sweep frequency-modulated continuous (FMCW) and multiple frequency-shift keying (MFSK) waveforms used for simultaneous range and speed estimation for...

Massive MIMO Hybrid Beamforming

This MATLAB example shows how hybrid beamforming is employed at the transmit end of a massive MIMO communications system, using techniques for both multi-user and single-user systems. The...

MATLAB Example: Doppler Estimation

This example shows a monostatic pulse radar detecting the radial velocity of moving targets at specific ranges. The speed is derived from the Doppler shift caused by the moving targets. We...

Train Custom LQR Agent with MATLAB

This example shows how to train a custom linear quadratic regulation (LQR) agent to control a discrete-time linear system modeled in MATLAB®.

Time Series Anomaly Detection Using Deep Learning

This example shows how to detect anomalies in sequence or time series data.

To detect anomalies or anomalous regions in a collection of sequences or time series data, you can use an...

Introduction to Hybrid Beamforming

This MATLAB example introduces the basic concept of hybrid beamforming and shows how to simulate such a system.

Introduction to Radar Systems: Target Radar Cross Section

This course is presented by Robert M. O'Donnell, a former researcher at MIT Lincoln Laboratory, and is designed to instill a basic working knowledge of radar systems.

The set of 10 lectures...

MATLAB Example: Waveform Analysis Using the Ambiguity Function

This example shows how to use the ambiguity function to analyze waveforms. It compares range and Doppler capabilities of several common pulsed waveforms such as the rectangular waveform, the...

MATLAB Example: Train Multiple Agents for Area Coverage

This example demonstrates a multi-agent collaborative-competitive task in which you train three proximal policy optimization (PPO) agents to explore all areas within a grid-world environment...

Radar Systems Engineering Lecture 4: The Radar Equation

This Free Radar Systems Engineering Course (video, audio and screen captured ppt slides) and separate pdf slides) has been developed as a first course in Radar Systems for first year...

Multibeam Radar for Adaptive Search and Track

This MATLAB example shows how to use radarDataGenerator for a closed-loop simulation of a multifunction phased array radar (MPAR). The example starts by defining MPAR system parameters and...

Sliding Mode Control Design for Mass-Spring-Damper System

This MATLAB/Simulink example describes the fundamentals of sliding mode control (SMC) and uses SMC to control a mass-spring-damper system.

Using Antenna Toolbox with Phased Array Systems

When you create antenna arrays such as a uniform linear array (ULA), you can use antennas that are built into Phased Array System Toolbox™. Alternatively, you can use Antenna Toolbox™...