
Conventional and Adaptive Beamformers
This example illustrates how to apply digital beamforming to a narrowband signal received by an antenna array. Three beamforming algorithms are illustrated: the phase shift beamformer...
See MoreSimulating Test Signals for a Radar Receiver
This example shows how to simulate received signal of a monostatic pulse radar to estimate the target range. A monostatic radar has the transmitter collocated with the receiver. The...
See MoreIncreasing Angular Resolution with Virtual Arrays
This MATLAB example introduces how forming a virtual array in MIMO radars can help increase angular resolution. It shows how to simulate a coherent MIMO radar signal processing chain using...
See MoreFixed-Point HDL-Optimized Minimum-Variance Distortionless-Response (MVDR) Be...
This example shows how to implement a fixed-point HDL-optimized minimum-variance distortionless-response (MVDR) beamformer in MATLAB.
See MoreMATLAB Example: Waveform Analysis Using the Ambiguity Function
This example shows how to use the ambiguity function to analyze waveforms. It compares range and Doppler capabilities of several common pulsed waveforms such as the rectangular waveform, the...
See MoreAutomotive Adaptive Cruise Control Using FMCW Technology
This MATLAB example shows how to model an automotive adaptive cruise control system using the frequency modulated continuous wave (FMCW) technique. This example performs range and Doppler...
See MoreMultibeam Radar for Adaptive Search and Track
This MATLAB example shows how to use radarDataGenerator for a closed-loop simulation of a multifunction phased array radar (MPAR). The example starts by defining MPAR system parameters and...
See MoreSimultaneous Range and Speed Estimation Using MFSK Waveform
This MATLAB example compares triangle sweep frequency-modulated continuous (FMCW) and multiple frequency-shift keying (MFSK) waveforms used for simultaneous range and speed estimation for...
See MoreMATLAB Example: Train Multiple Agents for Area Coverage
This example demonstrates a multi-agent collaborative-competitive task in which you train three proximal policy optimization (PPO) agents to explore all areas within a grid-world environment...
See MoreImprove SNR and Capacity of Wireless Communication Using Antenna Arrays
The goal of a wireless communication system is to serve as many users with the highest possible data rate given constraints such as radiation power limit and operating budget. To improve the...
See MoreMassive MIMO Hybrid Beamforming
This MATLAB example shows how hybrid beamforming is employed at the transmit end of a massive MIMO communications system, using techniques for both multi-user and single-user systems. The...
See MoreMATLAB Example: Doppler Estimation
This example shows a monostatic pulse radar detecting the radial velocity of moving targets at specific ranges. The speed is derived from the Doppler shift caused by the moving targets. We...
See MoreIntroduction to Hybrid Beamforming
This MATLAB example introduces the basic concept of hybrid beamforming and shows how to simulate such a system.
See MoreTrain Custom LQR Agent with MATLAB
This example shows how to train a custom linear quadratic regulation (LQR) agent to control a discrete-time linear system modeled in MATLABĀ®.
See MoreSliding Mode Control Design for a Robotic Manipulator
This MATLAB/Simulink example shows how to design a controller for a robotic manipulator with two actuated joints using sliding mode control (SMC). SMC is useful for systems that require...
See MoreSliding Mode Control Design for Mass-Spring-Damper System
This MATLAB/Simulink example describes the fundamentals of sliding mode control (SMC) and uses SMC to control a mass-spring-damper system.
See More